WEG CF W100 Serie Manual Del Usuario página 22

Keypad (HMI) and Basic Programming
NOTE!
When the inverter is in the fault state, the main display indicates the number of the fault in the format
Fxxx. Navigation is allowed after activation of key
NOTE!
When the inverter is in the alarm state, the main display indicates the number of the alarm in the
format Axxx. The navigation is allowed after the activation of key
the unit of measurement display until the situation causing the alarm is solved.
NOTE!
A list of parameters is presented in the quick reference of the parameters. For further information
about each parameter, refer to the CFW100 programming manual.
22 | CFW100 G2
.
; thus, the indication "A" goes to