Publicidad
Idiomas disponibles
Idiomas disponibles
Transferring a message (continued)
Recording a transfer message
When vou want to inform the person who answers on the registered
phone number that an incoming message is transferred, record the
transfer message.
1
2
3
Press C FLASH/REMOTE~).
The REMOTE lamp lights up.
Press TRANS/®.
SM'
Speak into the handset to record
your transfer mescfge.
You can record up to one minute.
H1
To stop recording, press STOP/®
A long confirmation beep sounds,
and your transfer message will be
played back.
5
Press
C
FLASH/REMOTE ).
The REMOTE lamp goes off.
Notes
•
Make sure that RING ON/BATT SAVE switch is set to RING ON.
• If the transfer message is shorter than two seconds, five short error beeps sound
and tlie transfer message is not recorded.
• There is no prerecorded message.
Tip
To record the transfer message from a touch-tone phone, see page 36.
To change the transfer message
Do in the same way as described above. The new transfer message
replaces the old one.
38™
Using as a telephone answering machine
Publicidad
