Sony SPP-AQ600 Manual De Instrucciones página 39

Turning on the transfer function
Press CD.
Press (T).
The trasnfer function is turned on
and the TRANS lamp lights up.
You will hear the destination
number and transfer message if
recorded.
To turn off the transfer function
2
Press CD.
3
Press (]£).
The trasnfer function is turned off and the TRANS lamp goes off.
Note
Do not allow more than 20 seconds to elapse between each step of the procedure.
Tip
To turn the transfer function on/off from a touch-tone phone, see page 36.
continued
Using as a telephone answering machine
39™