Ensure that the inlet cable does not
come into contact with the hot plate
housing or the oven housing, if it is
installed in the same unit.
Maintenance
HANDLING ELEMENTS
Lock touch button.
Increase power touch button.
Decrease" power touch button.
Timer/clock icon.
Decrease time touch button.
Increase" time touch button.
Timer pilot display.
Clock display.
Power level display.
Lock activated display.
Fig. 3
8
9
8
7
6
5
Fig. 2
8
9
8
7
6
5
Stop function touch button.
Double/triple burner selection
button.
Hot plate double burner on display.
Hot plate triple burner on display.
The touch buttons activate the
controls, and each is linked to a
display. You do not need to exert force
on the touch button, you only need to
activate the function.
1 Press the on touch button
for at least one second. The touch
control will become activated, you
will hear a beep and the displays
will light up. If any surface is hot, the
If you do not take any action in the
next 10 seconds the touch control will
ACTIVATING THE HOT PLATES
The hot plates will be deactivated, with
their respective power displays (10)
to 0, until a power level is selected. If
all of the hot plates are at 0, you have
10 seconds to activate one of them,
14
10
10
4
3
4
3
10
15
10
4
3
4
3
otherwise the touch control will switch
Use the touch buttons
to select a power level. If you press the
touch button
change to 1 and the hot plate burner
display (10) will light up. Keep pressing
it to increase the power level. You can
lower the power level using the touch
button
Quick switch-on at maximum power:
with the hot plate at 0, press the touch
button
straight to 9.
If you keep either of these two touch
buttons
(1)
they will repeat the action every half a
second, without you needing to press
them again.
Using the touch button
power to 0.
T h e h o t p l a t e w i l l s w i t c h o ff
automatically.
power level, if you press touch buttons
15 10
10
4
3
4
3
10
4
3
and
(3), the hot plate will
(4).
(4) once. The hot plate will go
or
(4/3) pressed down,
(4) lower the
and
(4/3), the hot plate will switch
12
13
11
10
4
3
2
12
13
11
10
14
4
3
2
EN
(4/3)
1
1
19