Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Before you contact the Technical
Service, please perform the following
checks.
Ensure that the power cable is plugged
in.
If there is molten material between
the pot and the glass, set the hot
plate to maximum power and try to
separate them.
Power surge. Contact your electricity
company.
There is an object or liquid on the
touch control. Remove any object or
liquid on the touch control.
If during cooking the temperature in
the control electronics is excessive,
the hot plates near the control
might disconnect to avoid damages.
Excessive temperature problems
during cooking only occur in extreme
cases (cooking at maximum power for
a long time). In any case, leave the hot
plate to cool down for a few minutes.
If the problem persists, check that the
appliance was installed in accordance
with these manual instructions.
23
Publicidad
