Publicidad
Idiomas disponibles
Idiomas disponibles
then press the touch button . The
alternately. Lower the touch button
to the desired cooking power (for
6 and A alternately.
You want to cook at power level 6 and
program a quick heat at the beginning.
Choose power level 9. Press the touch
button again
(3) and the power
Then press the touch button
lower it to power level 6. The system
keeps the hot plate at power level 9
6 and A alternately, and then (after
540 seconds) it automatically lowers
to continuous cooking level 6.
1 Use the touch button
change the power level.
When the power is increased using the
touch button
(3) the time that has
passed until then is taken into account
You have chosen power level 1 (50
seconds automatic cook start) and
after 20 seconds you change it to
4 (220 seconds). The automatic
cook start will be 200 seconds (220
minus 20).
DISCONNECTING THE AUTOMATIC
After at least 10 seconds have passed
since the automatic cook start function
was activated:
1 Press the touch button
automatic cook start function will be
deactivated.
This function allows you to set a time,
after which a warning sound is heard.
To activate the function:
1 With the touch control on and the
timer not set for any hot plate,
simultaneously press the clock
touch buttons
2 The clock display switches on (9),
displaying 00, and the pilot light (8)
3 Press the touch buttons
(6/7) again until you set the
desired time. After a few seconds
showing that the countdown has
begun.
Once the countdown is complete,
(4) to
you will hear a series of beeps, which
you can stop by pressing any of the
touch buttons.
If at any time during the countdown
function all of the hot plates are at
power level 0, the touch control will
the stopwatch will continue to the end
of the countdown or until you stop it.
(3) to
To stop the stopwatch, just set the
remaining time to 00. Firstly, to select
it, simultaneously press the touch
buttons
and
This function makes the cooking
process easier because you do not
have to be present: the timed hot
after the set time has lapsed. There
is a separate timer for each hot plate,
which allows all of the hot plates to be
timed simultaneously.
The function is controlled using the
increase/decrease time touch buttons
and
(6/7).
To activate the timer for one hot plate:
(4). The
1 Connect the appliance and activate
one or several hot plates at a set
power level.
2 Simultaneously press the clock
touch buttons
3 T h e d i s p l a y c o m e s o n ( 9 ) ,
displaying 00. The clock pilot light
4 P r e s s b o t h t o u c h b u t t o n s
successively until the pilot light for
or
(6/7).
the hot plate that you want to time
switches on.
5 Use the clock or touch buttons
between 1 and 99 minutes. The
or
increase touch button
at 1, and the decrease button
at 30.
The timer will be set for the hot plate.
Once the countdown is complete, the
will hear a series of beeps, which you
can stop by pressing any of the touch
buttons.
Repeat the steps above.
You can change the time afterwards.
1 Simultaneously press the clock
touch buttons
(6/7).
2 P r e s s b o t h t o u c h b u t t o n s
successively until the pilot light for
the hot plate that you want to time
switches on (8).
Now you can read and change the
value. If you want to cancel the timer
early, use the touch button
set it to 00.
You can use the lock button
lock all of the buttons on the touch
control panel. This prevents functions
from being activated accidentally and
children from playing with the controls.
To activate or deactivate the function,
keep the touch button
down for around 1 second. When the
function is activated, the pilot light
or
(6/7).
(11) lights up.
When the touch control system is
subjected to a higher voltage than the
(6/7) to select a cooking time
(6) starts
or
(6/7).
(2) pressed
EN
(5)
(7) to
(2) to
21
Publicidad
