Routine Maintenance; Special Maintenance - Comet C610H Manual De Instrucciones

m
WaRninG
• The rinsing fluids and the antifreeze liquid must be suitably disposed of and not discarded in the
environment.
m
WaRninG
• Follow the maintenance instructions contained in the manual of the machine in which the
motor pump is integrated.
• All maintenance jobs must only be performed after carrying out the operations described in the
"STOP" paragraph, meaning without any moving parts, no pipe full of liquid under pressure
and only after complete cooling.
• Any maintenance jobs must be performed in conditions of total stability.
• WARNING. To ensure the safety of the motor pump, only use original spare parts supplied by the
Manufacturer or approved by it.
• Also observe any laws enforced by local and/or national authorities of the country where the machine
is used in which the motor pump is integrated that include scheduled periodical inspections.
Perform the routine maintenance jobs shown in the manual of the machine in which the motor
pump is integrated; unless otherwise indicated, in relation to the motor pump, remember the
following:
MainTEnancE SchEDulE
After every use.
Every 50 hours.
Checks must be made more frequently if the motor pump operates where there are strong vibrations.
(1)
m
WaRninG
• Special maintenance jobs must only be performed by a Skilled Technician.
Perform the special maintenance jobs shown in the manual of the machine in which the motor
pump is integrated; unless otherwise indicated, in relation to the motor pump, remember the
following.
MainTEnancE SchEDulE
At the end of the season or once a year.
(*) Checks must be more frequent if liquids are used with abrasive particles in suspension.
MainTEnancE

ROuTinE MainTEnancE

• Check the delivery pipes of the water circuit and tightness of the
clamps.
• Check the pipes and fittings of the hydraulic oil circuit.
In the event of one or more parts being damaged, do not use the
machine and contact a SkillED TEchnician.
• Check the integrity of the suction circuit.
• Check the fastening of the motor pump to the structure of the machine
in which it is integrated.
In the event of such fastening being precarious, do not use the machine
and contact a SkillED TEchnician

SPEcial MainTEnancE

• Check and clean the impeller (*).
• Check tightness of the motor pump screws.
• Check the mechanical seals and bearings.
JOB
.
(1)
JOB
EN
25