cecotec BOLERO DRESSCODE 8800 INVERTER A Manual De Instrucciones página 110

ENGLISH
Type of fabric/label symbol
Cotton, mixed fibres, easy care/synthetics, wool, hand wash items.
Colour
Separate coloured and white items. Wash new coloured garments separately.
Size
Wash items of different sizes in the same wash to improve the washing efficiency and the
distribution of items in the drum.
Delicate garments
Wash delicates separately; they require gentle treatment.
Using the washing machine
1. Load the laundry
Open the door and insert the laundry into the drum. Load the items one at a time without
squeezing them or overfilling the drum, place them evenly. Please note the load sizes indicated
in the "Washing cycle table". Overloading of the machine will result in non-optimal washing
and wrinkled laundry.
2. Close the door
Make sure that there are no dirty clothes between the door glass and the rubber seal. Close the
door, make sure you hear the "click" as it closes.
3. Open the tap
Make sure that the appliance is connected to the water mains. Open the tap.
4. Set the desired programme
- Select the required programme with the washing programme selector. The duration
of the wash cycle is shown on the display. The machine automatically displays the default
temperature and possible spin speed settings for the selected programme. Adjust the
temperature and/or spin speed settings, if necessary, with the corresponding buttons.
- Change the temperature, if necessary
- Press the TEMP (Temperature) button to progressively decrease the temperature setting
until cold wash is reached ("--" will be displayed on the digital display). Pressing the button
again sets the highest possible setting.
- Change the spin speed, if necessary
- Press the "SPEED" button to progressively decrease the spin speed until the spin cycle
is switched off ("--" will be shown on the digital display). Pressing the button again sets the
highest possible setting.
110
BOLERO DRESSCODE 8800 INVERTER A / INVERTER STEEL A / INVERTER ICE BLUE A