Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Coffee does not come
out.
The coffee drips from
the filter holder (3) and
not from the nozzles.
The filter holder (3) will
not attach to the coffee
machine.
The coffee machine
does not work and all
the LEDS flash.
The "crema" of the
coffee is light in colour
and comes out of the
nozzle quickly.
EN - 16
What to do if...
Possible causes
No water in the tank (11).
Buttons (20) and (21) flash.
The filter holes (13-14-15)
are blocked.
The tank (11) is not
inserted correctly.
Lime scale build-up.
The filter holder (3) is not
attached correctly or is
dirty.
The dispensing unit gasket
is worn.
The nozzle holes are
blocked.
The filter has been
overfilled.
The filter has been
overfilled.
Possible fault.
The ground coffee has not
been tamped sufficiently.
There is insufficient ground
coffee.
The ground coffee is too
coarse.
Poor quality ground coffee. Change the type of ground
Solution
Fill the tank (11).
Clean the filter (13-14-15)
using the needle supplied
(19).
Insert the tank (11) correctly
into its housing.
Perform a descaling cycle
Attach the filter holder (3)
and rotate it fully home.
Clean the filter holder (3).
Have it replaced at an
authorised After-sales Centre.
Clean the nozzle holes
Introduce the correct quantity
into the filter using the
measuring scoop supplied.
Use the measuring scoop
(12) supplied and use the
correct filter.
Unplug the coffee machine
and contact an Authorised
After-sales Centre.
Tamp the coffee harder.
Increase the amount.
Use only ground coffee for
espresso coffee machines.
coffee.
.
.
Publicidad
