Functions Turning On The Unit; Technical Characteristics - PRESIDENT BILL FCC Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

C) FUNCTIONS TURNING ON THE UNIT
Three additional functions are available. KEY BEEP, COLOR
and MIC TYPE.
To activate a function, first turn off the unit. Then turn on
the radio while pressing the corresponding key (5, 7 or 5
+ 6).
1) KEY BEEP
(key 5)
Some operations such as changing channels, pressure
on keys etc. are confirmed by a beep tone. This function
can be
activated
or
deactivated
1. Turn off the power and then turn on the power while
holding down the ROGER key (5). KEY-BP appears in the
display. The state of the function
and Of.
2. The unit automatically
mode after 3 seconds.
When the function is activated, "
2) COLOR
(key 7)
1. Turn off the power and then turn on the power while
holding down the CB/WX key (7). COLOR appears in the
display.
2. The current color symbol flashes
(cyan),
(yellow),
3. Use s/t key (3) on the unit or UP/DN key (3) on the
change
microphone to
4. Press the PTT switch (11) to
as follows:
alternates
between On
exits
the function to return to
" is displayed.
(red),
(green), (blue),
(purple), or
(light blue).
the color.
confirm
and exit.
5. If no key is pressed for 10 seconds, the unit automatically
exits
the function to return to
3) MIC TYPE
(keys 5 + 6)
The BILL FCC accepts 6-pin PRESIDENT electret or dynamic
microphone.
In order to
alternate
1. Turn off the power and then turn on the power while
holding down bot ROGER key (5) and ANL/NB key (6).
MIC-TP appears in the display. The state of the function
alternates between electret EL and dynamic dY.
2. The unit automatically
mode after 3 seconds.
Note: On power up, in order to inform the user, the pro-
grammed microphone type is displayed for 2 seconds
(see § ON/OFF page 8).
CB
A) DC-POWER TERMINAL (13,8 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL SPEAKER JACK (8 Ω, Ø 3,5 mm)
D) TECHNICAL CHARACTERISTICS
1) GENERAL
- Channels
- Modulation mode
- Frequency ranges
- Weather channels
- Antenna impedance
- Power supply
12
CB
mode.
between the two types :
exits
the function to return to
: 40
: AM
: from 26.965 MHz to 27.405 MHz
: 162,400 MHz to 162,550 MHz
: 50 ohms
: 13.8 V
CB

Publicidad

Tabla de contenido
loading

Tabla de contenido