Publicidad
Idiomas disponibles
Idiomas disponibles
If for any reason you have to touch the saw chain, make
u
sure your chainsaw is switched off and the battery is
removed.
The noise from this product can exceed 80 dB(A). We
u
therefore recommend you take appropriate measures for
the protection of hearing
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Injuries caused when changing any parts, blades or ac-
u
cessories.
Injuries caused by prolonged use of a tool. When using
u
any tool for prolonged periods ensure you take regular
breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed when
u
using your tool (example:- working with wood, especially
oak, beech and MDF.)
Noise and Vibration
The declared vibration emission values and the declared noise
emission value(s) stated in the technical data and the declara-
tion of conformity have been measured in accordance with a
standard test method provided by EN 62841 and may be used
for comparing one tool with another. The declared vibration
emission value and the declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
Warning! The vibration and noise emission value during
actual use of the power tool can differ from the declared value
depending on the ways in which the tool is used. The vibration
level may increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
Labels on tool
The following pictograms are shown on the tool along with the
date code:
Warning! To reduce the risk of injury, the
user must read the instruction manual.
Do not use your saw in wet conditions or
expose it to rain.
Always wear head, hearing and eye protec-
tion.
Always wear a dust mask
Always wear gloves.
Always wear non-slip safety footwear.
Always hold a chainsaw firmly with both
hands.
Pay attention to the kickback of the chain-
saw and avoid contact with the tip of the
chain bar.
Do not use chainsaw one handed"
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from the tool.
Beware of falling objects. Keep bystanders
away
To ensure continued safe operation, check
the chain tension as described in this manu-
al after every 10 minutes of use, and adjust
back to a clearance of 3 mm as required. Oil
the chain after every 10 minutes of use.
Warning! Do not touch chain at the chipping
ejection point
Direction of rotation of the chain.
To ensure continued safe operation, the
chain and guide bar must only be replaced
with original STANLEY FATMAX. Replace-
ment chain part number A6158 replacement
guide bar part number 90619609.
Directive 2000/14/EC guaranteed
sound power.
11
Publicidad
