1 Water tank
2 Funnel
3 Tank lid
4 Valve + gasket
5 Including BRITA MAXTRA filter
6 BRITA Memo - the electronic cartridge
exchange indicator
External components:
1
Dispenser
2
Water lever
3
Water drop tray
6
3
Initial operations to use your water
dispenser
1. Remove every tape and other protection
5
system from the tank assembly
2. clean the components, as described into
"Water dispenser cleaning procedure", in
2
order to remove eventual residue.
Water dispenser cleaning procedure
1. Unblock the two stopping elements on
1
the sides of the tank as shown in the pic-
tures:
– take out the BRITA MAXTRA cartridge
from the water filter unit
– press the stopping elements in the
4
middle and move it up
– move the stopper into direction of the
central tank.
2. Push up the tank along the direction of
the valve.
3. Remove the lid and the funnel.
1
2
3
electrolux 9