Publicidad
Idiomas disponibles
Idiomas disponibles
by running the hoisting slings through the hooks provided. Below are
some safety instructions for transport and handling operations.
WARNING
The hoisting and handling operations required for
installation are to be undertaken using suitable
equipment and by specialised personnel who have
been trained in this type of operation and who will take
every precaution provided for and recommended to
prevent harm to persons or property.
4.2 INSTALLATION
WARNING
Before proceeding with the installation, carefully read
the following warnings. Non-compliance with these
warnings could result in injury, death or damage to the
equipment.
5. DESCRIPTION OF THE SUPPLY
Below is a list of the contents of the package delivered to the
customer. If you find that any of the parts listed below are missing,
please contact the reseller immediately. To avoid losing it during
shipping, the spanner has been inserted in the bag containing the
technical documents.
•
1 machine
•
1 high pressure hose
1 handgrip
•
1 wand with nozzle
•
1 use and maintenance manual
•
•
1 engine use and maintenance manual
6. OPERATOR INSTRUCTIONS
6.1 SAFETY INSTRUCTIONS
WARNING
Non-compliance with these safety instructions could
result in injury or damage to the equipment.
6.1.1 Checks to be made before starting the machine.
WARNING
Before operating the machine, make sure all protection
devices are in their place and in good condition.
6.2 PROHIBITED INTERVENTIONS
WARNING
Carrying out any adjustment, maintenance and/or
lubrication operations while the machine is running is
prohibited.
6.3 TRAINING
All users should receive professional training and be able to practice
working with the machine. This training should emphasize the
following:
The need to pay attention and be focused whilst working;
•
Use by children or the disabled is prohibited
•
Hold the gun and entire lance firmly
•
•
Do not use the machine when placed on uneven surfaces
Do not direct the jet towards animals or persons
•
Do not direct the spray towards any live parts
•
Do not disconnect the power plug by pulling on the cord
•
•
Do not use any extension cords
•
Do not use the machine with defective guards
L-LC232.00-BM
EN
7. USE OF THE HIGH-PRESSURE WASHER
7.1 WATER SUPPLY CONNECTION
Connect the machine to the water supply using a pipe of 3/4" or wider.
Connect the high pressure hose to the machine and to the lance by
screwing the screw connections firmly. Pour petrol into the tank,
close the cap and open the tap under the tank.
7.2 COMBUSTION ENGINE STARTING
For the starting phases, follow the instructions indicated in the use
and maintenance manual of the internal combustion engine.
WARNING
Carefully follow and scrupulously respect the relevant
pre-start, start, correct use and shutdown phases.
7.3 START
Fully open the water supply tap.
•
Before turning off the machine, wait a short period with the
•
engine at idle (see engine use and maintenance manual).
8. ROUTINE MAINTENANCE
WARNING
During routine maintenance, cleaning or extraordinary
maintenance operations, it is mandatory to put on the
personal protective equipment provided.
WARNING
Non-compliance with these safety instructions could
result in injury, death or damage to the equipment.
WARNING
All maintenance or cleaning operations are to be carried
out with the machine switched off, the spark plug cable
disconnected and only once the motor has cooled to avoid
burns and fire hazards. No one other than maintenance
personnel should be permitted to approach the machine.
8.1 SAFETY STANDARDS FOR ROUTINE MAINTENANCE
Routine maintenance comprises a series of simple operations to be
carried out at regular intervals and in accordance with the
manufacturer's instructions. The manufacturer has reduced the
number and complexity of the routine maintenance operations so
that they can be performed even by those who do not have
considerable technical skills or complex equipment. Mainly these
include:
Checking pump oil levels using the sight glass on the pump
•
housing
Cleaning the fittings and greasing the fittings gaskets
•
Check the levels of the engine oil, the gearbox and the conditions
•
of the filters (as prescribed in the use and maintenance manual
of the engine installed).
WARNING
If the oil needs to be changed, dispose of the old oil
responsibly in compliance with all current regulations.
Under no circumstances are these substances to be
released into the environment.
8.2 SAFETY STANDARDS FOR CLEANING THE MACHINE
25 / 40
Publicidad
