boso medicus family Manual Del Usuario página 28

How to recall stored measurement values
The latest measurement stored will be indicated imme-
diately after the average value has been displayed.
The number of the measurement appears in
M
the display. After 3 seconds the corresponding
N 01
measurement value (systole, diastole, pulse)
appears automatically.
The symbol button of the displayed value is illuminated
in green colour.
All stored measurements are displayed in the same
manner automatically.
The unit can be switched off by simply pressing the
symbol button.
If no button is pressed, the unit switches off
automatically after 5 seconds.
Change batteries only when the unit is switched off!
The measurements values will be deleted if the batte-
ries are not replaced within 30 seconds. With the remov-
al of the batteries while the unit is switched on, the me-
mory store is erased immediately.
28
M
Systole
mmHg
Diastole
mmHg
Puls/min.