Using The Memory; Storing A Reading; Recalling From Memory; Clearing The Memory - Mettler Toledo SevenGo Duo SG23 Instrucciones De Manejo

Using the memory

7 Using the memory

7.1 Storing a reading

The meter can store up to 99 endpointed results.
Press STO when the measurement has endpointed.
Notes
If STO is pressed when M99 is displayed, FUL indicates that the memory is full. To store further data you
will have to clear the memory (see "Clearing the memory").
A measurement can only be stored once. Err 9 appears if the data has already been stored.

7.2 Recalling from memory

a) Press RCL to recall the stored values from memory when the current measurement has endpointed.
b) Press
played.
c) Press READ to exit.

7.3 Clearing the memory

a) Continue pressing
b) Press READ.
c) Press READ again to confirm the deletion or press EXIT to return to measurement mode without
delet ing the data.
16
M01 indicates that one result has been stored, and M99 that the maximum of 99 results have
been stored.
or to scroll through the stored results. R01 to R99 indicate which result is being dis-
or to scroll through stored results until MRCL appears.
CLr blinks.
pH/conductivity meter SG23