Descargar Imprimir esta página

Sharp RT-350H Manual De Manejo página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
LISTENING TO TAPES (PLAYBACK)
V Operate the unit in numerical order.
® Each time the DIRECTION
but-
ton is pushed, dand > will auto-
matically switch back and forth.
1 Switch on both the amplifier and the RT-350H.
@ Set the function selector on the amplifier for playback of the RT-
350H and increase the volume level slightly.
3 Push the EJECT button to open the cassette compartment door.
Place the tape you want to listen to into the cassette compart-
ment with side A (1) facing towards you
INDICATOR {NORMAL, CrO2 or METAL).
PLAYING 1 eal
7 To listen to either side Aor B, push
the PLAY button.
OD
Playback of either side A or B will
begin.
® Afters playing either side A or B, the tape
will stop.
e When
the tape is
being wound from
left to right, this will
be side A.
#When
the tape is
being wound
from
right to left, this will
be side B.
The side recorded when the DIRECTION
indicator
is » will yield best results
during playback if playback is in the same
direction as recorded.
® The same applies to the ¢ direction.
listen to.
. This will light the TAPE
--PLAYING BOTH SIDES
When playing the tape continuously
from side A to side B or vice versa,
follow the procedure below.
7 Push the AUTO REVERSE button.
mae |
8 Push the PLAY button.
O
ie
After playing side A (or B), the tape
will automatically begin playing side
B (or A). {Quick Auto Reverse}
After playing both sides, the tape will
stop.
[E]9
BB GE GES
9
se
FB EBS GR
Bs
lf the tape has been recorded with the DOLBY NR system, set the
DOLBY NR switch to the ON position and then set the selectar to
B if recorded in B-type or set it to C if in C-type.
If recorded
without the DOLBY NR system, the DOLBY NR switch should be
set to the OFF position.
6 Push the DIRECTION
button to play the side that you wish to
__@ When listening to both sides, light the indicator to the side that
you wish to listen to first,
PLAYING A SINGLE
PROGRAMME
When
playing
only a single
pro-
* gramme
on side A or B, follow the
procedure below.
PRINGLE
PROGRAM
aa
8 Push the PLAY button.
o
K:
Only a single
programme
will be
played.
e After playing a single programme, the
tape will stop.

Publicidad

loading