Sharp RT-350H Manual De Manejo página 6

~ Names of contrals — Continued
AC Supply Voltage Selector
AC Supply Lead
Line Input Sockets Tape Selector Switch
Input Selector Switch
AC VOLTAGE SELECTOR
Check the setting of the AC voltage selector located on the rear panel
before plugging the unit into an AC outlet. If necessary, adjust the
selector to correspond to the AC power voltage used in your area.
Selector adjustment:
Turn the selector with a screwdriver until the appropriate voltage
number appears in the window. (110V, 127V, 220V or 240V)
NOTE
For use in the U.K. be sure that the selector is used only in the
240V position.
[E] 4