BLANK SECTION PASS FUNCTION
(The illustration below applies to side A)
<<»!
| Approximately
60-second
i blank space
®
|
{
|
l
|
Fast forward
|
Playback
Position where the PLAY
button was pushed.
Advances to the
end of tape.
(The illustration below applies to side A)
Approximately 30-second blank space
er
]
|
|
|
t
)
t
I
Fast forward
Playback
Advances to the end
of tape.
QUICK AUTO REVERSE
BOTH SIDES RECORDING OR PLAYBACK FROM SIDE ATO
SIDE B
Leader
tape
Playback or recording on side A
Playback or recording
on side B
t
@ The tape quick auto reverses at this point.
® Quick auto reverse may be inadvertently activated if the tape is
creased, therefore using creased tape with the auto reverse
function is not recommended.
e If the sensor detects the leader tape within the first] 5seconds
of playback or recording, quick auto reverse will not work.
However, the tape will still reverse at the end of the leader tape.
NOTES:
@® If the section of the tape is blank for approximately 60 seconds
when the PLAY button is pushed, the tape will automatically fast
forward to the end,
In addition, during playback, if there is an approximately 30-
second
space with
no sound
recorded,
the tape will auto-
matically be advanced to the end.
e When the end of the tape is reached, the opposite side wil! be
played. provided that the AUTO
REVERSE
indicator js lit.
@(n the one side playback mode with the REPEAT indicator on, the
tape will rewind and start playback from the beginning.
This system works in playback from side A to side B or vice versa and
in
record from side A to side B only.
BOTH SIDES PLAYBACK FROM SIDE B TO SIDE A
{Both sides recording from side B to side A can not be done.)
Playback on side B
>
Lit
Leader
Playback on side A
i| tape
® The tape quick auto reverses at this point.
® Do not place strong lighting close to the unit.
Quick auto
reverse might be accidentally activated,