Bosch GAS 12-40 MA Professional Manual Original página 21

Symbols and their meaning
Only attach a maximum of one L-BOXX.
The weight of the L-BOXX along with its
contents must not exceed 15 kg.
Do not hang the dust extractor on a
crane hook, e.g. in order to transport
it. The dust extractor is not suitable for
moving with a crane. There is a risk of in-
jury and damage if you do this.
Do not sit or stand on the dust ex-
tractor. The dust extractor may tip over
and become damaged if you do this. This
poses a risk of injury.
28 22
A
LED indicator for automatic filter clean-
ing mode
M
LED indicator for manual filter cleaning
mode
28/22
28 22
Indicator LED: Vacuum hose diameter
Button for automatic filter cleaning
Button for manual filter cleaning
Vacuum hose diameter button (volumet-
ric flow rate)
Automatic start/stop function
Extracts dust that accumulates from
working power tools;
the dust extractor switches on automatic-
ally and off again with a time delay.
The plug socket on the dust extractor is
constantly live.
Switching off
The plug socket on the dust extractor is
without power.
Extraction
Extracting dust deposits and dust from
the extraction system.
The plug socket on the dust extractor is
constantly live.
Min/Max
Continuous regulation of suction power:
Bosch Power Tools
Symbols and their meaning
– Maximum suction power for applica-
tions with a high level of dust genera-
tion
– Reduced suction power for applica-
tions that generate a low level of dust,
and also to regulate the suction
between the connected power tool
and the surface of the workpiece (e.g.
when sanding)
Data logging is activated in this dust ex-
tractor.
Permitted connected load of the connec-
ted power tool (country-specific)
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The dust extractor is intended for collecting, vacuuming,
conveying and separating non-flammable dry dusts and non-
flammable liquids. The dust extraction capability of the dust
extractor has been tested and corresponds to dust class M.
It is suitable for the increased demands in professional use,
e.g. in trade, industry and workshops.
Dust extractors from dust class M in accordance with IEC/
EN 60335-2-69 may only be used to vacuum and extract
harmful dust with an exposure limit of ≥ 0.1 mg/m
Only use the dust extractor if you can fully evaluate all func-
tions and carry them out without restrictions, or if you have
received corresponding instructions.
Product Features
The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.
(1) Container
(2) Main switch
(3) Hose adapter
(4) Plug socket for power tool
(5) Indicator LED A: Automatic filter cleaning mode
(6) Indicator LED M: Manual filter cleaning mode
(7) Indicator LED 22/28: Vacuum hose diameter
(8) Vacuum hose diameter button (volumetric flow rate)
(9) Button for manual filter cleaning
(10) Button for automatic filter cleaning
English | 21
3
.
1 609 92A 91Y | (02.02.2024)