Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
indicate a residual heat warning.
4. Heating control
- In standby mode, you can choose the cooking zone by pressing the cooking-zone
selection icon. Then, press the +/ - icons to set the power level of the corresponding
cooking zone. Press and hold the +/ - icons to continuously increase or decrease the
power level.
- When the hob is heating, press and hold the power icon for 3 seconds to switch off
and stop heating all cooking zones. The indicator of the corresponding cooking zone
that has been previously heated will show the high temperature warning symbol.
- In standby mode, if any cooking zone still has residual heat, the display will show the
high temperature symbol.
- If you need to switch off one of the cooking zones, you can select that zone first and
then press the icon "-" to power level "0" to switch off that zone, which will not affect
the heating of the other cooking zone. When the power level reaches "0", the indicator
of the corresponding cooking zone that has been heated up before will show the high
temperature warning symbol.
- If both zones operate at the same time, the total power will be equal to the sum of the
powers of all cooking zones in operation. Each cooking zone will operate according to
its power modulation ratio and will not affect each other.
Note:
1. During cooking, only one function can be activated or one of the icons on the hob
can be selected, i.e., only one decimal point will be displayed.
2. Press the icon " - " to set the power level to "0"; the hob will automatically switch off.
5. Multi-ring heating function. Fig. 10
5.1. Triple cooking ring function: The outer ring can only be switched on once the inner
ring is switched on.
1) Press the cooking-zone selection icon you wish to heat; the decimal point will be
shown on the display of the corresponding cooking zone.
2) Select the desired power level.
3) Press the triple ring selection icon to activate the outer ring, the corresponding
indicator light of the outer ring cooking zone will light up.
5.2. Triple cooking ring function: The outer ring can only be switched on once the
inner ring is switched on.
1) Press the cooking-zone selection icon you wish to heat; the decimal point will be
34
EVVO PLACA VITROCERÁMICA V60
Publicidad
