Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Automatic heating
time
For example, press the "+" icon to select "A", and press the "-" icon to select power level
4. The hob will start cooking at power level 9 for 6.5 minutes. Then, it will greturn to
the set power level 4.
Attention
1. You can only reduce the maximum power in the fast-heating mode by pressing the
"-" icon for the first 30 seconds, otherwise you will exit the fast-heating mode.
2. If it heats up rapidly at full power after 30 seconds, while it continues to alternately
display "A" and "9", press the "+" icon and the hob will remain in fast heating mode.
3. When changing the power level, the elapsed time will be automatically calculated
in the heating time corresponding to the new power level.
4. If you press the "-" icon at any level during the first 30 seconds of the fast-heating
mode, the elapsed time will be calculated at the new set level time, after heating in
that remaining time, the hob will return to the normal heating mode.
8. Safety child lock icon
- The hob can be locked by pressing and holding the child lock icon for 3 seconds
while the appliance is in standby or heating mode. The safety child lock icon will show
up. When the appliance is switched off, the child lock icon will turn off.
- To show that the safety child lock function has been activated, the safety child lock
indicator light will light up.
- To deactivate the safety lock function, long press the security lock icon.
- When the safety lock is activated, you cannot icons on the control panel except the
power icon.
Please note
To prevent malfunction, if the safety lock is activated by pressing the safety lock icon
and is not cancelled before the ceramic hob is switched off, the safety lock function
will still be active when the appliance is switched on again. If the security lock is not
deactivated, you will not be able to use any of the other icons except for the power
icon.
9. Setting the timer
- The hob has a timer that counts down from 1 to 99 minutes. If the timer display
shows 0 for the initial status, press the "-" icon, the countdown period will be from 30
to 0. At the end of the countdown period an acoustic signal will sound for 2 minutes.
Press any icon within 2 minutes to stop it.
- Press the timer icon. Use the "+/-" icons to set the countdown time, by pressing the
36
EVVO PLACA VITROCERÁMICA V60
1
3
4,8
6,5
8,5
2,5
3,5
4,5
5
Publicidad
