Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
shown on the display of the corresponding cooking zone.
2) Select the desired power level.
3) Press the triple ring selection icon to activate the outer ring, the corresponding
indicator light of the outer ring cooking zone will light up.
4) The second ring shall be activated when pressed for the first time, the third ring
shall be activated when pressed for the second time, and the outer ring shall be
deactivated when pressed for the third time.
5.3. Deactivation of the multi-ring cooking function
1) Press the cooking-zone selection icon you wish to heat; the decimal point will be
shown on the display of the corresponding cooking zone.
2) Press the triple ring/multiple ring selection icon to deactivate the outer ring.
6. Setting the power level
- In standby mode, press the cooking-zone selection icon to select the desired cooking
zone. The decimal point will be shown on the display of the corresponding cooking
zone as well as the heating level. You can use the increase and decrease icons to
adjust the desired power level.
- You can quickly increase or decrease the power level by pressing and holding either
icon. Each time the + icon is pressed, the power level will increase by one, up to level
9, and will be shown on the corresponding display. Each time you press the - icon, the
power level will be reduced by one, down to level 0 (each time you press the +/ - icons,
you will hear a short beep).
- Once the power level adjustment is completed, the decimal point on the display will
stop flashing and will normally display the power level after 10 seconds of inactivity.
- When the power level of any cooking zone is changed to 0, that cooking zone will
be switched off.
- If one cooking zone has been heated, the power level of all cooking zones is "0". The
appliance will automatically switch off after 1 minute of inactivity.
7. Automatic heating function
- Press the "+/-" icons to set the power to level 9, then press the "+" icon to make the
cooking zone alternately display "A" and "9".
- Press the "-" icon to adjust the final level of fast heating required.
- Press the "+" icon to reach power level 9 and then, press once more to activate the
fast heating function. The cooking zone indicator will show "A". Continue by pressing
the "-" icon and choose the cooking power level.
Power level
1
2
3
4
5
6
7
8
9
35
EVVO PLACA VITROCERÁMICA V60
Publicidad
