Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
"+" icon first, the timer will start from 1.
- If you want to cancel the timer, you can set the timer time to zero.
- The timer display will show the countdown time being programmed.
- The timer display will increment in 1-minute increments each time the "+" icon is
pressed, and a short beep will sound.
- The timer display will decrease in 1-minute intervals each time the "-" icon is pressed,
and a short beep will sound.
- If the set time exceeds 99 minutes, the timer display will return to "0".
Notes
- To set the timer, press the timer icon and use the "+/-" icons to enter a new time.
- After selecting the cooking zone, you can set the timer before adjusting the power
level if you do so within 10 seconds (the decimal point of the corresponding display
will flash, 1 time every second). If no operation is performed after the timer is set, the
timer will automatically return to 0 (the display will show 00), and the decimal point
will turn off.
- After starting the cooking zone, during and after the timer setting, the corresponding
cooking zone indicator light will flash (once every second) and will keep flashing until
the end of the timer.
9.1 Minute hand
The hob timer can be used as a timer for any of the cooking zones without affecting
the cooking process or the power setting of each zone, and each value can be different.
Timing of a single cooking zone
To set the countdown time for a cooking zone, first press the timer icon. The decimal
point on the display of the selected cooking zone will light up. The decimal point
on the timer display will be shown to indicate that the timer set has been related
to the selected cooking zone. At this point, you can use the "+/-" icons to adjust the
countdown time.
Timing of several cooking zones
- Each timer setting operation shall be the same as "Timing of a single cooking zone".
As long as a countdown time is set for the cooking zone, the corresponding indicator
light for that zone will flash.
- Press any cooking-zone selection icon, and the timer display will show the timer
value for that cooking zone.
- When no cooking zone is selected, the display will show the minimum timer value
37
EVVO PLACA VITROCERÁMICA V60
Publicidad
