ENGLISH
for all zones.
9.2 Pre-set time
The 3 cooking zones have a pre-set timer function. The relationship between the pre-
set timing and the power level is shown in the table below:
Power level
Pre-set time (h)
When all preset times are reached, the cooking zones will automatically switch off
and enter standby mode.
10. High temperature warning
- The display of the hot cooking zone will show the residual heat warning symbol to
indicate the high temperature of the corresponding cooking surface.
- Provided that the cooking zone has been heated up before, the high temperature
warning symbol will be displayed for 35 minutes continuously after the hob has been
switched off.
11. Protection function
- Protection against high temperatures: The electronic temperature sensor in the
control panel will transmit the temperature in real time to the chip in the control
panel. The control sensor initiates protection when the electronic temperature
sensor calibrates that the current temperature is above a certain value, to reduce the
heating level of the cooking zone at that time and resumes the heating level once the
temperature drops.
- Protection against residual heat: After heating a cooking zone, the cooking zone will
display the high temperature warning symbol, indicating that the cooking surface
temperature is too high, please do not touch to avoid getting burnt.
- Safety shutdown protection: For plug-in models, when switched off after one second
at any time, the voltage between L/N of the plug must fall below the safe voltage
range.
Guide to the use of ceramic hobs
- The first few times the hob is used, it may give off an acidic, burning smell. This odour
will disappear completely with repeated use.
- The positions from which the heat will radiate are clearly marked on the hob. Cooking
utensils must be placed exactly over these areas for effective heating to take place.
Cooking utensils must have the same diameter as the cooking zone in which they
38
EVVO PLACA VITROCERÁMICA V60
1
2
6h
6h
3
4
5h
5h
5
6-9
4h
1,5h