Descargar Imprimir esta página

Sony LMD-DM30 Instrucciones Para Utilizar página 12

Ocultar thumbs Ver también para LMD-DM30:

Publicidad

The LMD-DM50/DM30/DM20 is intended for use in the electromagnetic environment specified below. The customer or the user of the
LMD-DM50/DM30/DM20 should assure that it is used in such as environment.
Immunity test
Electrostatic
±6 kV contact
discharge (ESD)
±8 kV air
IEC 61000-4-2
Electrical fast
±2 kV for power
transient/burst
supply lines
IEC 61000-4-4
±1 kV for input/
output lines
Surge
±1 kV differential
mode
IEC 61000-4-5
±2 kV common
mode
Voltage dips, short
< 5% U
interruptions and
(> 95% dip in U
voltage variations
for 0.5 cycle
on power supply
input lines
40% U
(60% dip in U
IEC 61000-4-11
for 5 cycles
70% U
(30% dip in U
for 25 cycles
< 5% U
(> 95% dip in U
for 5 sec
Power frequency
3 A/m
(50/60Hz)
magnetic field
IEC 61000-4-8
NOTE: U
is the a.c. mains voltage prior to application of the test level.
T
12
Guidance and manufacturer's declaration - electromagnetic immunity
IEC 60601 test
Compliance level
level
±6 kV contact
±8 kV air
±2 kV for power
supply lines
±1 kV for input/
output lines
±1 kV differential
mode
±2 kV common
mode
< 5% U
T
T
)
(> 95% dip in U
T
for 0.5 cycle
40% U
T
T
)
(60% dip in U
T
for 5 cycles
70% U
T
T
)
(30% dip in U
T
for 25 cycles
< 5% U
T
T
)
(> 95% dip in U
T
for 5 sec
3 A/m
Electromagnetic environment - guidance
Floors should be wood, concrete or ceramic tile. If floors are
covered with synthetic material, the relative humidity should be
at least 30%.
Mains power quality should be that of a typical commercial or
hospital environment.
Mains power quality should be that of a typical commercial or
hospital environment.
Mains power quality should be that of a typical commercial or
)
hospital environment. If the user of the LMD-DM50/DM30/
T
DM20 requires continued operation during power mains
interruptions, it is recommended that the LMD-DM50/DM30/
DM20 be powered from an uninterruptible power supply or a
)
battery.
T
)
T
)
T
Power frequency magnetic fields should be at least characteristic
of a typical location in a typical commercial or hospital
environment.

Publicidad

loading

Este manual también es adecuado para:

Lmd-dm50Lmd-dm20