Publicidad
Factory default (LMD-DM50/DM30)
Luminance (cd/m
Configuration
number
Max.
1
410
(default)
2
410
3
500
Factory default (LMD-DM20)
Luminance (cd/m
Configuration
number
Max.
1
410
(default)
2
500
3
410
Input
DVI-D
DVI-D (×1)
LMD-DM50/DM30: TMDS Dual link
LMD-DM20: TMDS Single link
DisplayPort
DisplayPort connector (×1)
USB hub
UP stream (×1)
DOWN stream (×2)
General
Power requirements
AC 100 V to 240 V, 50/60 Hz, 1.5 A to
0.6 A
Power consumption
LMD-DM50/DM30: Approx. 90 W
typ
LMD-DM20: Approx. 85 W typ
Operating conditions
Temperature
5 °C to 40 °C (41 °F to 104 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity
30% to 80% (no condensation)
Pressure
700 hPa to 1,060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity
10% to 85% (no condensation)
Pressure
266 hPa to 1,060 hPa
16
Specifications
2
)
Gamma
Ambient
Min.
Light
0.8
0.0
DICOM
GSDF
1.0
0.0
DICOM
GSDF
0.8
0.0
DICOM
GSDF
2
)
Gamma
Ambient
Min.
Light
0.8
0.0
DICOM
GSDF
0.8
0.0
DICOM
GSDF
0.8
0.0
Gamma
2.2
Mass
LMD-DM50: Approx. 12.3 kg (27 lb
1.9 oz)
LMD-DM30: Approx. 11.6 kg (25 lb
9.2 oz)
LMD-DM20: Approx. 12.0 kg (26 lb
7.3 oz)
(including tilt stand of approx. 4.2 kg
(9 lb 4.2 oz))
Supplied accessories
AC power cord (1)
DVI cable (Dual link) (LMD-DM50/
DM30) (1)
DVI cable (Single link) (LMD-DM20)
(1)
USB cable (1)
CD-ROM (1)
Before Using this Unit (1)
Sales Companies Guide (1)
Optional accessories
Calibration Kit LMD-KT10
Display Network Manager LMD-
SN10
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide:
Not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE LOSS
OF PRESENT OR PROSPECTIVE PROFITS DUE
TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
Publicidad
