cecotec ENERGYSILENCE 900 CYCLONE Manual De Instrucciones página 23

1. PARTS AND COMPONENTS
1. Air outlet
2. Knob
3. Main frame
4. Tube
5. Base
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Fan
- Screw and base cover
- Instruction manual
3. ASSEMBLY
1. Remove the fan from its packaging. Mount it correctly following the steps in this instruction
manual. Store packaging materials in a safe place.
2. Check that the parts included in the box match those listed in this manual.
Then, proceed to mount it.
3. Fix the tube to the base with the cover and screw.
4. Remove the screw from the main frame by turning it clockwise. Next, place the main frame
on the tube and retighten the screw by turning it in the opposite direction.
ENGLISH
ENERGYSILENCE 900 CYCLONE
23