Publicidad
Note ！
Do not clean the filter by hot water whose temp. is higher than 45 ℃ to prevent fade
or deformation.
Do not burn it on fire or the filter would catches fire or deformation.
(4) Install air filter
Fix the 3 purifiers on filter, install filter on the several bulges on top of air inlet grille,
pull the handle behind air inlet grille toward inside to fix filter. As shown in Fig. 6.3.
(5) Close air inlet grille (Refer to the 1st step)
Maintenance Method
6.2 Clean air inlet grille
(1) Open air inlet grille (the same with the 1st step of Clean Air Filter)
(2) Take out air filter (the same with the 2nd step of Clean Air Filter)
(3) Take out air inlet grille
Open air inlet grille for an angle of 45° , as shown in Fig. 6.4, rise it.
(4) Clean
Clean it by pubescence brush, water and neutral cleaning, then throw water or dry
it.
Note ！ Do not use water above 45 ℃ to wash the panel to prevent fade or
deformation.
(5) Install air inlet grille (refer to 3rd step)
(6) Install air filter (refer to the 4th step of Clean Air Filter)
(7) Close air inlet grille (refer to the 1st step)
Fig. 6.3
Free Match For European Union
Fig. 6.4
17
Publicidad
