Vortice VORT HRI 200 PHANTOM BP IoT Manual De Instrucciones página 65

10.1 User mode settings
The installer can set the default fan speeds through this screen.
User modes settings
User modes
MIN
Supply fan control
Extraction fan control
MED
Supply fan control
Extraction fan control
MAX
Supply fan control
Extraction fan control
10.2 Fans setting
Fans settings
Minimum supply fan control
Maximum supply fan control
Minimum extraction fan control
Maximum extraction fan control
Supply fan stop delay
Extraction fan stop delay
Minimum outdoor temperature
Outside temperature permit
Minimum outdoor temperature
Minimum outdoor temperature histeresis
Via this menu you can (main functions):
• Set the minimum and maximum speed (both supply and extraction fans).
• Delay stopping the fans when the appliance is switched off. This delayed fan stop function is absolutely necessary to
prevent overheated air from the pre-heater from damaging the appliance.
• Set a "Minimum outside temperature" value below which the fans stop.
ENGLISH
30%
100%
20%
30%
100%
20%
50%
100%
20%
50%
20% 100%
75%
100%
75%
100%
65