Publicidad
Idiomas disponibles
Idiomas disponibles
Normal setting
1. Press the B2 button and select
"Normal".
→ The LED (L2) lights up.
→ The set appliance temperature
remains constant, depending on the ambient temperature.
Super setting
1. Press the B2 button and select "Super".
→ The LED (L3) lights up.
→ This function is suitable for the fast freezing of fresh food. It switches off
automatically after 54 hours and returns to normal cooling mode.
Alarm function
•
If the appliance door is open for more than 90 seconds, a signal sounds. The alarm
stops when the appliance door is closed.
•
The internal temperature of the appliance changes depending on the ambient
temperature (place of installation), the frequency of door opening and the load. These
factors are important for an optimal operating temperature.
•
With very high summer temperatures, set the temperature regulator to a higher level
to maintain the desired cooling temperature.
•
If the appliance has not been used for a long time, turn the temperature regulator to
the highest setting (see chapter Switch on the Appliance).
EN
Page | 43
Publicidad
