Publicidad
Idiomas disponibles
Idiomas disponibles
WIRING INSTRUCTIONS
5. After connections have been made, turn wires
upward and carefully push wires into the outlet
box, with the white and green wires to one side
of the box and the black wires toward the other
side.
FINAL ASSEMBLY INSTRUCTIONS
1. Remove one of the two preassembled
shoulder screws in the hanger bracket (B).
Loosen the second shoulder screw without
fully removing it. Then, rotate ceiling canopy
(D) so second shoulder screw moves into the
small opening of the keyslot. Tighten shoulder
screw and re-install the previously removed
shoulder screw to secure ceiling canopy (D) to
hanger bracket (B).
WARNING
To avoid possible fire or shock, make sure the
electrical wires are completely inside the canopy
housing and not pinched between the housing
and the ceiling.
2. Securely attach and tighten the canopy
screw cover (E) over the shoulder screws in
the hanger bracket (B), utilizing the keyslot
twist-lock feature.
5
Black
1
2
E
14
Listed
Outlet Box
White
Green Wire
(Ground) from
Hanger Bracket
Lowes.com/harborbreeze
Green Wire
(Ground) from
Downrod
Assembly
BLK-ANT
D
Publicidad
