Harbor Breeze LP8300LAZ Manual De Instrucciones página 6

ASSEMBLY INSTRUCTIONS
1. Remove motor assembly (A) from plastic bag,
then remove preassembled stabilizer tabs.
Discard bag and tabs.
2. Remove the two preassembled screws of the
downrod support from the motor assembly (A).
Retain screws for later use.
Note: Make sure to keep loose hardware
separate to avoid confusion during installation.
3. Remove the six preassembled screws of the
motor coupler from the motor assembly (A).
Retain screws for later use.
Note: Make sure to keep loose hardware
separate to avoid confusion during installation.
1
A
2
A
3
A
6
Lowes.com/harborbreeze