Publicidad
Idiomas disponibles
Idiomas disponibles
6. OPERATION
Fuel
Attention! Do not mix 2-stroke oil and fuel directly into the equipment's fuel tank.
Always use regular gasoline and gasoline of known origin (do not use adulterated fuel).
DO NOT USE GASOLINE WITH ADDITIVES
Do not leave fuel stored in the fuel tank.
2-stroke oil:
There are two different formulation standards for 2-stroke oil: mineral and semi-synthetic.
MINERAL
Lower cost
Shortens engine life
Formulation – JASO FB
25:1 mixture (40 ml of 2-stroke oil to 1 liter of
regular gasoline)
How to perform the mixing:
03 - Pour regular gasoline up to the brand of the
mixer that comes with the equipment.
04 - Then pour oil 2 times up to the indicated mark,
noting that for semi-synthetic oil the volume of
oil added to the mixture is less than for mineral
oil.
Attention! Damage caused to the equipment due to the use of poor quality or inappropriate
gasoline as well as oil not recommended by Brudden will not be covered by warranty.
SEMISSYNTHETIC
Higher cost
Most recommended; Increases engine life
Formulation – JASO FC or JASO FD
40:1 mixture (25 ml of 2-stroke oil to 1 liter of
regular gasoline)
54
llustrative image
Publicidad
