Astralpool Eco Elyo-05 Guia De Inicio Rapido página 7

4
User functions
Lock/Unlock
the keypad
5 seconds
Select an operating mode
The heat pump has 3 operating modes:
Silent -
Ideal to maintain the temperature or at night time during summer season
• Heat Pump runs at low power setting
• Compressor operates on low-speed ranges to minimize energy consumption
• Lowest noise and highest COP
Smart -
Automatic power adjustment to maximize comfort and efficiency
• Compressor operates smartly from low to high-speed ranges
• Reduced noise and energy consumption
Powerful -
Ideal to begin the season or to operate in cold conditions
• Heat Pump runs at high power setting
• Compressor operates on high-speed ranges to heat the pool faster
• Maximum heating power
Adjust the temperature setpoint
Press to set and modify the
value
Set the time (clock)
Press 5 sec
Program the timer
Press to enter Timer 1
functions. Timer 1 blinking.
Press again to modify Timer
1 OFF hours and minutes as
done previously
Refer to the online manual for
further details about operating
modes and the query functions.
Press to confirm
Press - the hours are blinking
Press to enter Timer 1 ON
hours.
Press to confirm Timer 1 ON/
OFF settings.
Use the arrow buttons to
adjust the hours.
Repeat for the minutes.
Use the arrow buttons to
adjust the start hours.
Use the arrow buttons to set
Timer 2 ON/OFF settings.
❷ Use
Press to change the
operating mode.
Press to validate and return
to the main screen.
Press again to set the
minutes. Use the arrows to
adjust the start minutes.
7