Keysight U1731C Guia Del Usuario página 26

1 Introduction
Power-on options
Some options can be selected only while you turn the LCR meter on. These
power-on options are listed in the table below.
To select a power-on option, press and hold the specified key in
turning the LCR meter ON (
Table 1-2 Power-on options
Key Description
Tests the LCD.
Hold
Rec
All annunciators are displayed in the LCD. Press any key to exit this mode.
Simulates the Auto Power-Off (APO) mode. Press any key to turn the LCR meter back on and resume
Range
normal operation.
Auto
Checks the firmware version.
The LCR meter's firmware version will be shown on the primary display. Press any key to exit this mode.
Null
Performs the Open/Short CAL on all frequencies and all ranges for the User mode (
Cal
Enters the Setup menu.
ZLCR
See
P S
than 1 second to exit this mode.
[1] The Open/Short CAL requires approximately 1.5 minutes to complete.
26
Chapter 3, "Setup Options," starting on page 65 for more information. Press and hold
).
Keysight U1731C/U1732C/U1733C User's Guide
Table 1-2 while
[1]
).
for more
ZLCR
P S