Keysight U1731C Guia Del Usuario página 51

Measuring impedance (Z)
All circuit components, resistors, capacitors, and inductors have parasitic
components. These include, for example, unwanted resistance in capacitors,
unwanted capacitance in inductors, and unwanted inductance in resistors. Thus,
simple components should be modeled as complex impedances.
Set up your LCR meter to measure impedance as shown in
To learn more about impedance measurement theories, refer to the Impedance
NOTE
Measurement Handbook. This document can be downloaded from our website
at http://www.keysight.com/find/lcrmeters.
1 Press
2 Press
Figure 2-8
3 Insert a component into the component socket or connect the test clip to the
4 Press
5 Read the displays.
Keysight U1731C/U1732C/U1733C User's Guide
to power on the LCR meter.
to select a suitable test frequency, and press
Freq.
impedance measurement.
Impedance measurement with theta
component leads as required.
to change the secondary display measurement (D, Q, or θ).
DQO
Limit
Features and Functions
Figure 2-9.
to select
ZLCR
P S
2
51