Measuring capacitance (C)
Set up your LCR meter to measure capacitance as shown in
To avoid electrical hazards, discharge the capacitor to be tested before
WARNING
measuring.
1 Press
2 Press
Figure 2-4
3 Insert a capacitor into the component socket or connect the test clip to the
4 Press
5 Read the displays.
Keysight U1731C/U1732C/U1733C User's Guide
to power on the LCR meter.
to select a suitable test frequency, and
Freq.
a press
to enable the auto identification function; or
b alternatively press
Capacitance measurement with D factor
component leads as required.
to change the secondary display measurement (D, Q, or θ).
DQO
Limit
to select capacitance measurement.
ZLCR
P
S
Features and Functions
Figure
2-5.
2
47