Keysight U1731C Guia Del Usuario página 57

From the LCR meter's display, you can view the following statistical data for any
set of readings:
– Max: highest reading since the static recording mode was enabled
– Min: lowest reading since the static recording mode was enabled
– Avg: average or mean of all readings since the static recording mode was
– MaxMinAvg: present reading (actual input signal value)
Press the
Figure 2-14
Press
values.
To exit this mode, press and hold the
– Static recording captures only stable values and updates the memory; it will
NOTE
– Static recording is only available in manual ranging; therefore, activation
Keysight U1731C/U1732C/U1733C User's Guide
enabled
key for more than 1 second to enter the static recording mode.
Hold
Rec
>1s
Hold
R ec
Using the Rec function
again to cycle through the Max, Min, Avg, or MaxMinAvg (present) input
Hold
Rec
not record any overload ( ) value for any of the LCR functions. In addition,
the LCR meter will not record values below 50 counts in capacitance
measurement.
while in autoranging will automatically set the LCR meter to manual ranging.
Features and Functions
key for more than 1 second.
Hold
Rec
2
57