Keysight U1731C Guia Del Usuario página 59

Features and Functions 2
The default values of the variable user sets are set to the same as the fixed user
NOTE
sets. Use the Setup menu to change the high and low limits for each set. See
"Changing the user high/low limit values" on page 80 for more information.
Press the key for more than 1 second to activate the high/low limit mode. The
DQO
Limit
last-known set number (H## or L##) will be indicated in the secondary display.
>1s
DQO
Limit
Figure 2-15 Using the Limit function
While the annunciator is flashing, use the or key to select an
Freq.
appropriate limit set.
Keysight U1731C/U1732C/U1733C User's Guide 59