Publicidad
Idiomas disponibles
Idiomas disponibles
RT 120 - RTH 120
ENGLISH
ENGLISH
NOTES AND GENERAL WARNINGS
Read this manual carefully from start to finish before installation.
For installation, it is important to strictly observe the instructions given in this manual.
The manufacturer declines all responsibility in the event of damages to people and things caused by
incorrect installation or alterations of the system.
Installation operations must be carried out exclusively by a specialised technician who is aware of the dangers
connected with installation and the relative prescriptions, in compliance with the standards in force and according
to the instructions supplied by the manufacturer.
Use the protective devices and the equipment provided.
WARRANTY
Read the warranty certificate contained in the box of the system to correctly activate the product
warranty.
Failure to perform the operations indicated will nullify the system warranty.
The original parts, apart from the electrical components, are identified with numeric references.
The dotted alphabetical references (e.g.: A.1) identify parts of an assembled unit.
The instructions refer to the RIGHT and the LEFT and are related to the driver of the vehicle facing the direction
of travel.
Use the system exclusively for the use envisaged by the manufacturer and make no arbitrary changes or
alterations to the appliance.
AUTOCLIMA does not cover modified or transformed systems with a warranty.
The system is not designed for use in potentially explosive environments.
The system is not designed for use in a saline environment.
The conditioner weighs approximately 45 kg. Take all the necessary precautions necessary when
handling, installing, carrying out repairs and during use, to prevent damage and injury and to avoid
dropping it. DO NOT handle when alone.
Check that the vehicle structure is strong enough in the assembly area to sustain the weight and stress
generated by the system.
THE FITTER MUST REINFORCE THE VEHICLE STRUCTURE IF NECESSARY.
During the assembly phases, making holes in parts of the vehicle, make sure that you do not damage the wiring
or piping of systems already installed.
USE APPROPRIATE PRODUCTS TO ADEQUATELY SEAL EVERY HOLE MADE IN THE VEHICLE WALLS.
The pipes must be accurately positioned, avoiding narrow bends, sharp edges or metal sheeting which might
damage them.
It is very important that the pipes avoid traps all along the way.
28/71
Publicidad
