Kärcher 1.107-380.0 Manual Del Usuario página 7

ENGINE
Starter Grip
Pump
Pump — Develops high pressure.
Starter Grip — Used for starting the engine
manually.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Unloader Valve — Safety device which allows
pressure
tu be released when spray gun is closed
Wand — Must be connected to the spray gun.
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray
gun.
On SCW-4.0/40 GL connect one end to hose reel
swivel and the other one to spray gun
COMPONENT IDENTIFICATION
HOSE REEL
Pump
protector
Unloader
KARCHER Surface Cleaner 9.802-898.0
Trigger Bar
Surface
Cleaner
PUMP
Pump Protector — Cycles fresh cool water through
pump when recirculating water reaches 140°F.
Trigger Bar — Controls the application of water in
surface cleaner.
Rotative Surface Cleaner — Used to application of
water onto cleaning surface with trigger bar device.
Hose Kink Protector — Must be connected
between feed hose and pump, protects to kink in
feed hose, reinforced with coil spring, maintains
even water flow.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water will leak from valve.
Warm water will discharge from pump protector
onto floor. This system prevents internal pump
damage.
Spray
Gun
7