Foppapedretti CLEVER i-Size Manual De Instrucciones página 29

the belt guides of the lap seat belt and that you have correctly attached the buckle.
Insert the diagonal belt into the belt guide loop, making sure it is not twisted.
INSTALLING THE KID-PAD
The KID-PAD is a device that must ALWAYS be installed on the diagonal vehicle seat
belt to ensure proper protection in the event of an impact.
Position the diagonal belt under the two Velcro straps of the KID-PAD (12), close the
KID-PAD on itself (fig. 13) making sure that the shaped part is positioned between the
chin and the chest of the child (Fig. 14).
WARNING! The KID-PAD must ALWAYS be used.
REMOVE THE COVER
Fig. 15 Lift the fabric lining off the car seat.
Fig. 16, 17 Slide the cover off each side to remove it.
RE-FITTING THE COVER
Proceed in reverse order to put on te cover.
• ENGLISH •
USE IN THE VEHICLE
29