Tunturi REHA RAILS Manual De Montaje página 14

English
D11 & D12 Fasten Nuts and Bolts
DO TIGHTEN ALL BOLTS AND
NUTS IN THIS STEP AND BOLTS
AND NUTS OF FORMER STEPS
DO NOT TIGHTEN BOLTS
AND NUTS IN THIS STEP
Additional information
Packaging disposal
Government guidelines ask that we reduce the
amount of waste material disposed of in land fill
sites. We therefore ask that you dispose of all
packaging waste responsibly at public recycling
centres.
End of life disposal
We at Tunturi hope you enjoy many years of
enjoyable use from your fitness trainer. However,
a Time will come when your fitness trainer will
come to the end of its useful life. Under 'European
WEEE Legislation you are responsible for the
appropriate disposal of your fitness trainer to a
recognised public collection facility.
Product changes after installing
Other then the benefit of the extended handrails,
giving you extra comfort and support, almost all
treadmill functionalities remain the same after
installing the REHA rail set onto your treadmill.
Some functions will change, knowing:
14
Securely tighten all
Nuts and Bolts after all
components have been
assembled in current
and previous steps.
Do not tighten all Nuts
and Bolts in this step.
Folding and storage
The treadmill can still be folded to ease the
cleaning under the treadmill running deck, but the
machine is no longer able to transport by using
the integrated transport wheels when the REHA
rail is attached to the treadmill frame.
⚠ CAUTION
• Before folding the equipment, make sure that
the incline is 0. If the incline is not 0, folding
will damage the mechanism.
If you still need to relocate the machine, it is
recommended to detach the ReHa rail set first
so the integrated transport wheels becomes
functional again.
⚠ WARNING
• The REHA rail extended handrails cannot
support the treadmill weight when used as
hand grips to lift the treadmill.
Adjusting the support feet
After installing the REHA rail, it is recommended
to adjust the support feet under the triangle
shaped base frame so it supports the REHA rear
stands best.
- Turn the support feet in/ out as required to put
the equipment in a stable and as well possible
levelled position.
- Tighten the locknut's* to lock the support feet.
�� QUICK TIP
• It is easier to do this with two persons, so
one person can tilt the equipment, while the
other makes the needed adjustment.