Description Of Symbols - Triton TDJ600 Instrucciones De Uso

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product.
This product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand this manual.

Description of Symbols

Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Warning: Sharp blades or teeth!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries
Caution!
Class II construction (double insulated for additional protection)
Environmental Protection Waste electrical products should not be
disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Technical Abbreviations Key
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n
No load speed
0
n
Rated speed
GB
° Degrees
Ø Diameter
Hz Hertz
W, kW
Watt, kilowatt
/min or min Operations per minute
-1
dB(A) Decibel sound level (A weighted)
m/s
2 Metres per second squared (vibration magnitude)
4
Original Instructions
Specification
Model no:
Voltage:
Input power:
No load speed:
Drill bit spacing:
Drilling depth:
Drill diameter:
Fence angle range:
Height Adjustment:
Ingress Protection:
Protection Class:
Power cord length:
Dimensions (L x W x H):
Weight:
As part of our ongoing product development, specifications of Triton
• Imperial measurements are approximate.
Sound and vibration information:
Sound pressure L
Sound power L
Uncertainty K:
Weighted vibration:
Uncertainty:
The sound intensity level for the operator may exceed 85dB(A)
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and use
anti-vibration gloves. Do not operate the tool with hands below a normal comfortable
temperature, as vibration will have a greater effect. Use the figures provided in the
specification relating to vibration to calculate the duration and frequency of operating
the tool.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased
levels of noise and vibration.
Carefully read and understand this manual and any label attached to the tool before
use. Keep these instructions with the product for future reference. Ensure all persons
who use this product are fully acquainted with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk factors.
Use with caution. If you are at all unsure of the correct and safe manner in which to
use this tool, do not attempt to use it.
TDJ600
120V ~ 60Hz
5.9A
17,000min
1-1/4"
0 - 1-1/2"
2 x 5/16"
0 - 90°
23/64"- 1-11/16 "
IP20
9' 10"
13-1/2 x 6-1/8 x 8-5/8"
6.59lbs
products may alter without notice.
: 88.4dB(A)
PA
: 99.4dB(A)
WA
3dB
2.584m/s 2
1.5m/s
2
and sound protection measures are necessary.
-1