Description Of Symbols - Triton TWSS10 Instrucciones De Uso Y De Seguridad

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary for safe
and effective operation of this product. This product has unique features and, even if you are
familiar with similar products, it is necessary to read this manual carefully to ensure you fully
understand the instructions. Ensure all users of the tool read and fully understand this manual.
Keep these instructions with the product for future reference.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
WARNING – To reduce the risk of injury, user must read instruction
manual.
Conforms to relevant legislation and safety standards.
Caution!
Class I construction (protective earth)
Indoors use only!
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
WARNING: This product is heavy and as a precaution it is advised that two
people assemble the machine.
Technical Abbreviations Key
V
~
A, mA
Hz
EN
W, kW
4
949257_OwnerManual.indd 4 949257_OwnerManual.indd 4
Original Instructions
Specification
Model No:
Rating:
Power:
Drive:
No load speed:
Sharpening stone:
Honing wheel:
Bore size:
Power cord length:
Protection class:
Dimensions (L x H x W):
Weight:
As part of our ongoing product development, specifications of Triton products may alter
without notice.
Sound level information:
Sound Pressure L
Sound Power L
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures
are necessary.
the time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
the declared total value depending on the ways in which the tool is used. There is the need to
identify safety measures to protect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Volts The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another. The declared vibration total
Alternating current value may also be used in a preliminary assessment of exposure.
Ampere, milli-Amp
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal working conditions. A poorly
Hertz
maintained, incorrectly assembled, or misused tool may produce increased levels of noise
and vibration. www.osha.europa.eu provides information on sound and vibration levels in the
Watt, kilowatt
workplace that may be useful to domestic users who use tools for long periods of time.
:
PA
:
WA
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
WARNING: The vibration emission during actual use of the power tool can differ from
TWSS10
230-240V~, 50Hz
120W
Induction motor
125min
-1
Ø250 x 50mm
Ø230 x 30mm
Ø12mm
2m
345 x 370 x 270mm
14.9kg
86.2dB(A)
99.2dB(A)
3dB (A)
18/10/2021 11:14 18/10/2021 11:14