Description Of Symbols - Triton TW SS10 Instrucciones De Uso Y De Seguridad

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This
product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you
fully understand the instructions. Ensure all users of the tool read and fully understand this manual.

Description of Symbols

Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Conforms to relevant legislation and safety standards.
Caution!
Class I construction (protective earth)
Indoors use only!
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
WARNING: This product is heavy and as a precaution it is advised
that two people assemble the machine.
GB
4
Original Instructions
Specification
Model No:
Rating:
Drive:
No load speed:
Sharpening stone:
Honing wheel:
Bore size:
Power cord length:
Protection class:
Dimensions (L x H x W):
Weight:
Note: Imperial conversions are approximate.
Sound level information:
Sound Pressure LPA:
Sound Power LWA:
Uncertainty K:
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will have a greater effect. Use
the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use
for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
TWSS10
220V - 240V~, 50/60Hz, 120W
Induction motor
125min-1
Ø250 x 50mm
Ø230 x 30mm
Ø12mm
2m
345 x 370 x 270mm
14.5kg
86.2dB(A)
99.2dB(A)
3dB