Graco Near2Me DLX Manual Del Usuario página 4

WARNING
EN
Complies to EN 1466:2014/AC:2015.
IMPORTANT - KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE
YOUR CHILD'S SAFETY MAY BE
AFFECTED IF YOU DO NOT FOLLOW
THESE INSTRUCTIONS.
This product is suitable for a child who
can not sit up by itself, roll over and
can not push up itself up on its hand
and knees. Maximum weight of the
child: 9kg.
Only use on a firm, horizontal level and
dry surface.
Do not let other children play
unattended near the carry cot.
Do not use if any part of the carry cot
is broken, torn or missing.
Use only replacement parts supplied
or approved by the manufacturer.
Be aware of the risk of open fire and
other source of strong heat, such as
electric bar fires, gas fires, etc., in the
near vicinity of carry cot.
The handles and the bottom of the
carry cot should be inspected regularly
for signs of damage and wear.
DO NOT use or add any mattress other
than the one supplied with the carry
cot.
This carry cot is not intended for
prolonged periods of sleeping.
Do not leave your child unattended.
Never use the carry cot on a stand.
The head of the child in the carry cot
should never be lower than the body
of the child.
Before carrying or lifting, make sure
that the handle is in the correct
position of use.
This product is only suitable for a child
who cannot sit up unaided.
Do not place the carry cot near an
open fire or other source of strong
heat.
Do not add another mattress on
top of the mattress provided or
recommended by the manufacturers.
CARE & MAINTENANCE
Clean the frame, plastic parts, and
fabric with a damp cloth, but do not
use abrasives or bleach. Do not use
silicon lubricants as they will attract
dirt and grime. Do not store the carry
cot in a damp place.
To ensure long-lasting use, wipe this
product off with a soft, absorbent
cloth after using it in rainy weather
and before storing away.
Refer to the care labels attached to
the soft goods for washing and drying
instructions.
It is normal for fabric to color from
sunlight and to show wear and tear
after a long period of use, even when
used normally.
For reasons of safety, only use Graco®
replacement parts.
Check regularly if everything functions
properly. If any parts are torn, broken,
or missing, stop using this product.
Parts list
Frame
A Carry Cot
B Carry Cot Cover
C Mattress Pad
5
Product Set Up
To Set Up Carry Cot
See images 1 - 6
• Please check whether 2 support
mounts are fixed correctly. 2
To release the support mounts, please
see image 2 - 1
• To open the canopy, pull the canopy
toward front - 2 while pressing the
3
buttons on the both sides. 3 - 1
• Always use the mattress when using
the carry cot.
• Mattress cover can easily be removed to
wash.
• Put the bedcover into the carry
cot, then attach the hook and loop
fasteners on the carry cot. 5
• Using the bedcover in winter to give
baby a warmer and more comfortable
sleep environment.
• The completely assembled Carry cot is
shown as 6
To disassemble the carry cot simply
reverse the steps above.
Product Use
To Use Carry Cot On Graco
Stroller Near2Me DLX
See images 7 - 9
When using with Graco Stroller Near2Me
DLX, please refer to the following
instructions.
• If you have any problems about using
the carry cot, please refer to their own
instruction manuals.
• Please do not use the product when
the baby's head is lower than feet after
attached carry cot.
• Always use the mattress when using
the carry cot.
• Please don't fold stroller when attaching
the carry cot.
• Place the carry cot directly down until it
clicks into adapters. 7
• A click sound means carry cot
assembled completely. 8
Remove Carry Cot
• Press release buttons on both sides of
carry cot 9 - 1, and then lift it upwards.
9 - 2
Detach Soft Goods
See images 10 - 13
To re-assemble carry cot soft goods, follow
the steps above in reverse 13 - 10 .
6