Description Of Symbols - Triton TSPS450 Instrucciones De Uso

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary for safe
and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Toxic fumes or gases!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
Dust extraction required or recommended
For indoors use only!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
GB
4
Original Instructions
Technical Abbreviations Key
V
~, AC
A, mA
n
0
n
opm
spm
°
Specification
Model no:
Voltage:
No load speed:
Oscillations:
Stroke length:
Sanding sleeve sizes:
Dust port:
Table size:
Spindle dimensions:
Protection class:
Dimensions (L x W x H):
Weight:
Imperial sizes are approximate.
As part of our ongoing product development, specifications of Triton products may alter
without notice.
Sound and vibration information:
Sound Pressure L
Sound Power L
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration.
Volts Ø
Alternating current Hz
, DC
Ampere, milli-Amp
W, kW
No load speed
Rated speed /min or min
Orbits or oscillations per rpm
minute
dB(A)
Strokes per minute
Degrees m/s
2
TSPS450
120V~, 60Hz, 3.5A
2000/min
58opm
16mm (5/8")
13mm, 19mm, 26mm, 38mm, 51mm,
76mm dia
(1/2", 3/4", 1", 1-1/2", 2", 3")
38mm (1-1/2")
370 x 295mm (14-1/2" x 11-5/8")
12.7mm x 1.5mm (1/2" x 1/16") thread
390 x 330 x 450mm (15" x 13" x 18")
12.9kg (28lbs)
: 76dB(A)
PA
: 89dB(A)
WA
3dB
Diameter
Hertz
Direct current
Watt, kilowatt
Operations per minute
-1
Revolutions per minute
Decibel sound level
(A weighted)
Metres per second
squared (vibration
magnitude)