Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
5. Clean the drawer recess within the machine using a soft brush.
Make sure to clean the cap valves to prevent clogging.
6. Once cleaning is complete, slide the drawer back into position
ensuring it moves freely into its fully retracted position.
Filter
We recommend that you check and clean the filter regularly, at
least two or three times a year.
Especially:
• If the appliance is not draining properly or if it fails to perform
spin cycles.
• If the pump is blocked by a foreign body (e.g. buttons, coins or
safety pins).
IMPORTANT: Ensure that the water has cooled before
draining the appliance.
1. Stop the appliance and unplug it.
2. Insert removal tool like slotted screwdriver into the small
opening of bottom baffle, press the bottom baffle downward
with much strength and open it.
3. Put a flat container under filter door and then drain with
emergency drain pipe (see [draining residual water] for specific
operation methods). Then, loosen filter anticlockwise and
completely unscrew and remove the filter.
4. Clean the filter and the filter chamber.
5. Check that the pump rotor moves freely.
6. Re-insert the filter and screwit in clockwise as far as it will go.
7. Reinstall the plinth.
25
EN
Publicidad
