Publicidad
Idiomas disponibles
Idiomas disponibles
likelihood of accidental contact with the moving saw
chain.
j) Follow instructions for lubricating, chain
tensioning and changing the bar and chain.
Improperly tensioned or lubricated chain may either
break or increase the chance for kickback.
k) Cut wood only. Do not use pruning saw for
purposes not intended. For example: do not use
pruning saw for cutting metal, plastic, masonry
or non-wood building materials. Use of the
pruning saw for operations different than intended
could result in a hazardous situation.
l) This pruning saw is not intended for tree felling.
Use of the pruning saw for operations different
than intended could result in serious injury to the
operator or bystanders.
m) Do not operate a pruning saw in a tree unless
you have been specifically trained to do so.
Operation of a pruning saw in a tree without
proper training could increase the risk of
serious personal injury.
n) Follow all instructions when clearing jammed
material, storing or servicing the pruning saw.
Make sure the switch is off and the battery pack
is removed. Unexpected actuation of the pruning
saw while clearing jammed material or servicing may
result in serious personal injury.
o) Recommendation that the first-time user
should, as a minimum, practise cutting logs on a
saw-horse or cradle.
p) Recommendation to have sharpening and
maintenance of the saw chain performed by
authorised service centres.
4
2) Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the guide
bar touches an object, or when the wood closes in and
pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
Pinching the saw chain along the top of the guide
bar may push the guide bar rapidly back towards the
operator.
Either of these reactions may cause you to lose control
of the saw which could result in serious personal injury.
Do not rely exclusively upon the safety devices built into
your saw. As a pruning saw user, you should take several
steps to keep your cutting jobs free from accident or
injury.
Kickback is the result of pruning saw misuse and/or
incorrect operating procedures or conditions and can be
avoided by taking proper precautions as given below:
a) Maintain a firm grip, with thumbs and fingers
encircling the pruning saw handles, with both
hands on the saw and position your body and
arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator,
if proper precautions are taken. Do not let go of the
pruning saw.
b) Do not overreach and do not cut above shoulder
height. This helps prevent unintended tip contact
and enables better control of the pruning saw in
Cordless Pruning Saw
unexpected situations.
c) Only use replacement bars and chains specified
by the manufacturer. Incorrect replacement guide
bars and saw chains may cause chain breakage and/
or kickback.
d) Follow the manufacturer's sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kickback.
FOR PRUNING SAW WITH
THE EXTENDED POLE SAFETY
WARNINGS
Important Safety Instructions
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
FOR ALL APPLIANCES:
1) Avoid Dangerous Environment - Don't use
appliances in damp or wet locations.
2) Don't Use In Rain.
3) Keep Children Away - All visitors should be kept at a
distance from work area.
4) Dress Properly - Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
5) Use Safety Glasses - Always use face or dust mask if
operation is dusty.
6) Use Right Appliance - Do not use appliance for any
job except that for which it is intended.
7) Don't Force Appliance - It will do the job better and
with less likelihood of a risk of injury at
the rate for which it was designed.
8) Don't Overreach - Keep proper footing and balance
at all times.
9) Stay Alert - Watch what you are doing. Use common
sense. Do not operate appliance
when you are tired.
10) Store Idle Appliances Indoors - When not in use,
appliances should be stored indoors in
dry, and high or locked-up place - out of reach of
children.
11) Maintain Appliance With Care - Keep cutting edge
sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating
and changing accessories. Keep handles dry, clean,
and free from oil and grease.
12) Check Damaged Parts - Before further use of the
appliance, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service center
EN
Publicidad
